Products/Installation/Core drilling/Core drilling accessories

Vacuum pump, RODIA-VAC, 230 volts with 10 litre safety tank

The electric vacuum pump is the ideal solution for anyone who uses a core drill system without the possibility of a dowel fastening. The optional rubber seal in the drill stand's base plate can compensate for uneveness up to 4-5 mm.

Choosen variant:Vacuum pump, RODIA-VAC, 230 volts with 10 litre safety tank

Article number:FF35200

Vacuum pump is equipped with a safety tank, which maintains the vacuum during a power failure Oil-free, low maintenance vacuum pump, oil change and disposal of polluting substances is eliminated Pressure gauge always displays the vacuum for more safety while drilling Transport wheels for more mobility on the construction site A drill stand can only be attached in combination with the optional vacuum set

Vacuum pump RODIA-VAC, 230V
including 10l tank

Suction rotor RODIADUST, 1.1/4" UNC with G1"2" motor mount
Vacuum set f.RODIACUT/-DRILL 131/1800 DWS
Vacuum set for RODIACUT 202DWS/270C

Ersatzteilliste(ETL_RODIA-VAC_FF35200,FF35204_DE_0820.pdf)
Betriebsanleitung(h92625_i10_ba_rodia_vac_ff35200_ff35204_0222.pdf)

Voltage (min-max)	230 V
Speed	460 rpm
Power plug type	Plug type F (CEE 7/4)
Protection	IP 22
Suction volume (min-max)	200 – 200 l/min
Noise level	77
Sound pressure level with unit of measurement	77 dB(A)
Sound power level (LwA) with unit of measurement	88 dB(A)
Content with unit of measure	10 ml

Article number	FF35200
EAN/GTIN	4004625352007
Net weight with unit of measure	17.500 kg
Gross weight with unit of measure	17,500 kg
Packaging Length with unit of measurement	80,000 cm
Packaging Width with unit of measurement	40,000 cm
Shipping weight with unit of measure	17,500 kg
Packaging height with unit of measurement	40,000 cm
SKU	FF35200

Vacuum pump, RODIA-VAC, 230 volts with 10 litre safety tank

Technical data